Skip to content
Lima Fuar

Exhibition Stand Prices 2026: m² Cost Guide

July 15, 2026

In 2026, custom wooden exhibition stands in Turkey cost between 150 € and 400 € per square metre; for a smart, premium-looking stand, 200–250 €/m² is the typical target band. At shows in Europe the band rises to 300–500 €/m², while modular Maxima systems run at 100–150 €/m² and congress and event stands at around 400–550 €/m².

Price ranges by stand type

  • Custom wooden (Turkey): 150–400 €/m² — smart premium stands are usually in the 200–250 €/m² band.
  • Custom wooden (European shows): 300–500 €/m² — we explain below why the range is wide.
  • Maxima (modular) stand: 100–150 €/m² — reusable systems that install quickly.
  • Congress/event stand: 400–550 €/m² — the highest unit price, because of the operational intensity on small plots.

Worked examples

The figures below are simply the ranges above multiplied by the area; they are a rough starting point for budgeting, not a quotation.

  • 18 m² Maxima stand: 1,800–2,700 €
  • 36 m² custom wooden stand, Turkey (200–250 €/m² band): 7,200–9,000 €
  • 60 m² custom wooden stand, Europe: 18,000–30,000 €
  • 100 m² custom wooden stand, Europe: 30,000–50,000 €
  • 18 m² congress stand: 7,200–9,900 €

On large plots the unit price usually sits in the lower half of the range, and on very small stands in the upper half, because fixed costs such as design and transport are spread over fewer square metres.

What is included in the price?

The per-square-metre price we give for European shows covers design, production, transport, installation and dismantling. The floor-space rental you pay to the organiser is not part of the stand price; who orders venue services such as power and water is stated separately in the quotation.

What determines the price

The price per square metre of a stand cannot be reduced to a single number; the following variables directly affect the final cost:

  • Quantity and quality of materials: wall, floor and ceiling finishes and accessories.
  • Fabrication and craftsmanship: the complexity of custom cutting, cladding, painting and assembly.
  • Stand area: unit cost usually falls on large plots, while on very small stands fixed costs (design, transport) weigh more.
  • Build-up time at the show: limited build-up hours mean overtime and extra crew.
  • Single-storey or double-deck: double-deck structures raise the price per square metre noticeably because of structural calculation, staircase, railings and additional approvals.

Why is the range wider at European shows?

In addition to the factors that drive pricing in Turkey, in Europe it matters in which country, at which venue and under which organiser the show takes place. Many venues or organisers require goods arriving at the stand to be unloaded and delivered only by their appointed logistics company, which is a significant extra cost. Most organisers also ask for third-party liability insurance, a method statement and a risk assessment; preparing these documents and arranging the insurance makes it difficult to give a similar unit price from show to show.

Because we know these procedures and are in direct contact with the major venues, we resolve them quickly and clarify surprise costs at the quotation stage. For the rules specific to Germany, see our guide to exhibiting in Germany.

Why is production in Turkey more affordable?

Production costs and overheads are lower in Turkey, and the stand is not bought from a subcontractor but built in our own facility. In our experience this gives a price advantage of up to 35–40% over builders in Western Europe for a comparable stand. Details: exhibition stand builder from Türkiye.

Why are congress stands more expensive?

Congress and event stands are usually small structures that have to be installed within a few hours, in venues such as hotels or congress centres where loading and unloading is difficult. As operational intensity rises, so does the cost per square metre, which is why the price per square metre of congress stands is clearly higher than that of large exhibition stands.

Pricing for double-deck stands

On double-deck structures, the structural calculation, the load-bearing construction and the organiser’s charge for the upper level come into play; we therefore quote per project rather than giving a range per square metre. Details: when does a double-deck exhibition stand make sense?

What to share for a firm quotation

The ranges above only give you a starting point; for a firm price it is enough to share the show name, dates, city, your stand area (m²) and whether it is single-storey or double-deck. Our team replies within 24 hours with an itemised quotation. You can compare stand types on our custom wooden and Maxima service pages and then request a quotation.

Frequently Asked Questions

Is VAT included in the exhibition stand price?+

Turkish VAT applies to shows held in Turkey; for a service delivered at a show outside Turkey the invoice is issued without Turkish VAT. Whether VAT is included is stated separately in the quotation.

Which is the most affordable exhibition stand option?+

Per square metre, modular Maxima stands: 100–150 €/m². Because they are reusable, the total cost falls further for companies that use the same system at several shows.

How quickly can I get a firm price?+

Once you share the show name, dates, city, stand area and whether it is single-storey or double-deck, we prepare an itemised quotation within 24 hours.

Ready for your next exhibition?

Let us design a similar stand for you — quote within 24 hours.

Get a Free Quote

← Blog